Predictive Three-Dimensional Printing of Spare Parts with Internet of Things

References

• Angelus A , Özer Ö (2016) Knowledge you can act on: Optimal policies for assembly systems with expediting and advance demand information. Oper. Res. 64(6):1338–1371.Link, Google Scholar
• Armstrong MJ , Atkins DR (1996) Joint optimization of maintenance and inventory policies for a simple system. IIE Trans. 28(5):415–424.Crossref, Google Scholar
• Arreola-Risa A , DeCroix GA (1998) Make-to-order vs. make-to-stock in a production and inventory system with general production times. IIE Trans. 30(8):705–713.Crossref, Google Scholar
• Banner (2023) Condition monitoring for predictive and preventive maintenance. Accessed March 22, 2023, https://www.bannerengineering.com/us/en/solutions/iiot-data-driven-factory/condition-monitoring-for-predicitive-and-preventive-maintenance.html#/.Google Scholar
• Bertsekas DP (2012) Dynamic Programming and Optimal Control , vol. 2, 4th ed. (Athena Scientific, Belmont, MA).Google Scholar
• Bertsekas DP (2017) Dynamic Programming and Optimal Control , vol. 1, 4th ed. (Athena Scientific, Belmont, MA).Google Scholar
• Chen D , Ouyang M , Shi D (2023) The impact of IoT on cold chain logistics. Preprint, submitted December 11, http://dx.doi.org/10.2139/ssrn.4647598.Google Scholar
• Chen J , Gusikhin O , Finkenstaedt W , Liu Y-N (2019) Maintenance, repair, and operations parts inventory management in the era of Industry 4.0. IFAC PapersOnLine 52(13):171–176.Crossref, Google Scholar
• Deshpande V , Iyer AV , Cho R (2006) Efficient supply chain management at the U.S. coast guard using part-age dependent supply replenishment policies. Oper. Res. 54(6):1028–1040.Link, Google Scholar
• Elwany AH , Gebraeel NZ (2008) Sensor-driven prognostic models for equipment replacement and spare parts inventory. IIE Trans. 40(7):629–639.Crossref, Google Scholar
• Eruguz AS , Tarkan T , Van Houtum GJ (2018) Integrated maintenance and spare part optimization for moving assets. IISE Trans. 50(3):230–245.Crossref, Google Scholar
• Evans JS (2006) Wear limits vs. trends in oil analysis. Machinery Lubrication (November), https://www.machinerylubrication.com/Read/958/wear-limits-trends.Google Scholar
• Geissbauer R, Wunderlin J, Lehr J (2017) The future of spare parts is 3D: A look at the challenges and opportunities of 3D printing. Accessed July 26, 2019, https://www.strategyand.pwc.com/report/future-spare-parts-3d.Google Scholar
• Gupta D , Benjaafar S (2004) Make-to-order, make-to-stock, or delay product differentiation? A common framework for modeling and analysis. IIE Trans. 36(6):529–546.Crossref, Google Scholar
• Ha A (2000) Stock rationing in an M/Ek/1 make-to-stock queue. Management Sci. 46(1):77–87.Link, Google Scholar
• Hanaphy P (2020a) University of Minnesota researchers use motion capture technology to 3D print sensors directly onto expanding organs. 3D Printing Indust. (June 19), https://3dprintingindustry.com/news/university-researchers-use-near-infrared-light-3d-printing-to-create-an-ear-inside-the-body-172512/.Google Scholar
• Hanaphy P (2020b) University researchers use near-infrared light 3D printing to create an ear inside the body. 3D Printing Indust. (June 12), https://3dprintingindustry.com/news/university-of-minnesota-researchers-use-motion-capture-technology-to-3d-print-sensors-directly-onto-expanding-organs-172745/.Google Scholar
• Hayford (2023) Oil & gas accelerates its use of additive manufacturing. Accessed November 18, 2023, https://www.3yourmind.com/news/oil-gas-industry-accelerates-its-use-of-additive-manufacturing.Google Scholar
• Khajavi SH , Partanen J , Holmström J (2014) Additive manufacturing in the spare parts supply chain. Comput. Indust. 65(1):50–63.Crossref, Google Scholar
• Li R , Ryan JK (2011) A Bayesian inventory model using real-time condition monitoring information. Production Oper. Management 20(5):754–771.Crossref, Google Scholar
• Lin X , Basten RJI , Kranenburg AA , van Houtum GJ (2017) Condition based spare parts supply. Reliability Engrg. System Safety 168:240–248.Crossref, Google Scholar
• McKinsey Global Institute (2015) The Internet of Things: Mapping the value beyond the hype. McKinsey & Company (June), https://www.mckinsey.com/∼/media/mckinsey/industries/technology%20media%20and%20telecommunications/high%20tech/our%20insights/the%20internet%20of%20things%20the%20value%20of%20digitizing%20the%20physical%20world/the-internet-of-things-mapping-the-value-beyond-the-hype.pdf.Google Scholar
• Muckstadt JA (2005) Analysis and Algorithms for Service Parts Supply Chains , Springer Series in Operations Research and Financial Engineering (Springer Science + Business Media, New York).Google Scholar
• Muriel A , Prokle M , Tomastik R (2018) Life-cycle engine fleet simulation for spare part inventory management with advanced condition information. IEEE Winter Simulation Conf. (WSC) (IEEE Press, Piscataway, NJ), 2309–2320.Google Scholar
• Olsen T , Tomlin B (2020) Industry 4.0: Opportunities and challenges for operations management. Manufacturing Service Oper. Management 22(1):113–122.Link, Google Scholar
• Panagiotidou S (2020) Joint optimization of spare parts ordering and age-based preventive replacement. Internat. J. Production Res. 58(20):6283–6299.Crossref, Google Scholar
• Parrott A , Warshaw L (2017) Industry 4.0 and the Digital Twin: Manufacturing Meets Its Match (Deloitte University Press, New York).Google Scholar
• Rajagopalan S (2002) Make to order or make to stock: Model and application. Management Sci. 48(2):241–256.Link, Google Scholar
• Saghafian S , Tomlin B , Biller S (2021) The Internet of Things and information fusion: Who talks to who? Manufacturing Service Oper. Management 24(1):333–351.Link, Google Scholar
• Song J-S , Zhang Y (2020) Stock or print? Impact of 3-D printing on spare parts logistics. Management Sci. 66(9):3860–3878.Link, Google Scholar
• Teachey D (2021) IoT in manufacturing: Voices from the field. How the Internet of Things is changing the way manufacturers work. SAS Insights. Accessed July 13, 2021, https://www.sas.com/en_us/insights/articles/big-data/iot-in-manufacturing-voices-from-the-field.html.Google Scholar
• Westerweel B , Basten RJI , Van Houtum GJ (2019) Preventive maintenance with a 3D printing option. Preprint, submitted February 12, http://dx.doi.org/10.2139/ssrn.3355567.Google Scholar
• Wikipedia (2023) Internet of Things. Accessed March 27, 2023, https://en.wikipedia.org/wiki/Internet_of_things.Google Scholar
• Wijnmalen DJD , Hontelez JAM (1997) Coordinated condition-based repair strategies for components of a multi-component maintenance system with discounts. Eur. J. Oper. Res. 98(1):52–63.Crossref, Google Scholar
• Wolff RW (1989) Stochastic Modeling and the Theory of Queues (Prentice-Hall, Hoboken, NJ).Google Scholar
• Xu J , Xu L (2017) Integrated System Health Management: Perspectives on Systems Engineering Techniques (Academic Press, New York).Google Scholar
• Youssef KH , Van Delft C , Dallery Y (2004) Efficient scheduling rules in a combined make-to-stock and make-to-order manufacturing system. Ann. Oper. Res. 126(1):103–134.Crossref, Google Scholar