Entrance Capacity of an Automated Highway System

References

  • Broucke M. , Varaiya P. A theory of traffic flow in automated highway systems. Transportation Res.C. (1995) 5 11 37 Google Scholar
  • Cassidy M. , May A.D. A proposed analytical technique for estimating capacity and LOS of major freeway weaving sections. Transportation Res. Record (1991) 1320 99 109 Google Scholar
  • Cassidy M. , Skabardonis A. , May A.D. Operation of major freeway weaving sections: Recent empirical evidence. Transportation Res. Record (1989) 1225 61 72 Google Scholar
  • Eskafi F. , Varaiya P. Smart path: An automated highway system simulator . (1992) . California PATH Technical Report 92–0708–1 Google Scholar
  • Hall R.W. Time effectiveness of new transportation technologies: the case of highway automation. Transportation Planning Technology (1995a) 19 1 17 CrossrefGoogle Scholar
  • Hall R.W. Longitudinal and lateral throughput on an idealized highway. Transportation Sci. (1995b) 29 118 127 LinkGoogle Scholar
  • Hall R.W. Cost effectiveness of automated highway systems: a case study in the engineering economic analysis of a new technology. Engrg. Econom. (1996a) 41 317 343 CrossrefGoogle Scholar
  • Hall R.W. Optimal lane assignment on an automated highway. Transportation Res.C. (1996b) 4 211 229 CrossrefGoogle Scholar
  • Hall R.W. Effect of capacity concentration on highway corridor performance. Transportation Res. A (1997) 31 475 491 Google Scholar
  • Hall R.W. , Li C. Evaluation of priority rules for entrance to automated highways. ITS Journal (2000) 6 175 194 Google Scholar
  • Kou C.C. , Machemehl R.B. Modeling vehicle acceleration deceleration behavior during merge maneuvers. Canadian J.Civil Engrg. (1997) 24 350 358 CrossrefGoogle Scholar
  • Leight S. A microscopic-simulation control model for AHS merging analysis. (1997) (University of Wisconsin, Madison,WI) . Master of Science thesis Google Scholar
  • Michaels R.M. , Frazier J. Driver behavior model of merging. Transportation Res. Record (1989) 1213 4 10 Google Scholar
  • Moskowitz K. , Newman L. Notes on Freeway Capacity. Highway Res. Record (1963) 27 44 68 Google Scholar
  • NAHSC Milestone 2 report, Task C2 Downselect System Configurations (1996) (National Highway System Consortium, Troy,MI) Google Scholar
  • Neuman T.R. , Pline J.L. Roadway geometric design. Traffic Engineering Handbook (1992) (Prentice Hall, Englewood Cliffs, N.J.) . Institute of Transportation Engineers Google Scholar
  • Polus A. , Lirneh M. , Factor J. Vehicle flow characteristics in acceleration lanes. J.Transportation Engrg. (1985) 111 595 606 CrossrefGoogle Scholar
  • Ran B. , Huang W. , Leight S. Some solution strategies for automated highway exit bottleneck problems. Transportation Res. C. (1997) 4 167 179 CrossrefGoogle Scholar
  • Rao B.S.Y. , Varaiya P. Flow benefits of autonomous intelligent cruise control in mixed manual and automated traffic. Transportation Res. Record (1993) 1408 36 44 Google Scholar
  • Rao B.S.Y. , Varaiya P. Roadside intelligence for flow control in IVHS. Transportation Res.C (1994) 2 49 72 CrossrefGoogle Scholar
  • Rao B.S.Y. , Varaiya P. , Eskafi F. Investigations into achievable capacity and stream stability with coordinated intelligent vehicles. Transportation Res. Record (1993) 1408 27 35 Google Scholar
  • Rumsey A.F. , Powner E.T. The synchronous moving–cell control philosophy for automated transportation systems. Transportation Planning Tech. (1974) 2 156 164 CrossrefGoogle Scholar
  • Shladover S. E. Operation of Automated Guideway Transit Vehicles in Dynamically Reconfigured Trains and Platoons (1979) (U.S. Dept. of Transportation, Washington, D.C.) . Urban Mass Transportation Administration Google Scholar
  • Stevens W. B. The Automated Highway System (AHS) Concepts Analysis (1993) (Mitre Corporation, McLean, Virginia) . MTRW0000123 Google Scholar
  • Transportation Research Board Highway Capacity Manual (1985) (Transportation Research Board, Washington, D.C) Google Scholar
  • Tsao H.-S.J. , Hall R.W. A probabilistic model for AVCS longitudinal collision/safety analysis. IVHS J. (1994) 1 261 274 Google Scholar
  • Tsao H.-S.J. , Hall R.W. , Hongola B. Capacity of automated highway systems: Effect of platooning and barriers. (1993) . PATH Research Report UCB–ITS–PRR–93–26 Google Scholar
  • Tsao H.-S.J. , Hall R.W. , Chatterjee I. Analytical models for vehicle/gap distribution on automated highway systems. Transportation Sci. (1997) 31 18 33 LinkGoogle Scholar
  • Tsao H.-S.J. , Hall R.W. , Shladover S.E. Design options for operating fully automated highway systems. (1993) . Presented at VNIS conference Google Scholar
  • Wan M.-H. , Cassidy M.J. , Chan P. Evaluating the capacity of freeway weaving sections. J. Transportation Engrg. (1993) 119 360 384 CrossrefGoogle Scholar
INFORMS site uses cookies to store information on your computer. Some are essential to make our site work; Others help us improve the user experience. By using this site, you consent to the placement of these cookies. Please read our Privacy Statement to learn more.